Need some assistance on what to sand down more in order to get a batter cabin top fit. Here's where I'm at right now. Over all it seems to fit well except for.....Both sides have about the same 1/8th inch area visible on the flange but near the aft end it disappears.
Is this normal or what area should I sand to have this drop down more? I first thought it was the flange back area hitting the longeron but there's a gap right there. Thanks!
Is this normal or what area should I sand to have this drop down more? I first thought it was the flange back area hitting the longeron but there's a gap right there. Thanks!