VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 02-10-2019, 09:02 PM
llavalle's Avatar
llavalle llavalle is offline
 
Join Date: Oct 2008
Location: Québec, Canada
Posts: 418
Thumbs up Battery powered blind rivet puller

So I'm starting a -12iS project and I don't really like working with pneumatic tools.

Found out that Milwaukee makes a battery powered puller in their M12 line (smaller batteries).

Did a modified version of the practice tool kit using LP4-3 instead of the AN4 rivets. This things works GREAT.

I shot a small video (in 4k) of me using the tool on the practice toolbox. It's great :


https://www.youtube.com/watch?v=lqX5_mubUTE

Link to the tool : here
__________________
Philippe Marseille
RV-9A Kit Emp done, wings @50% - SOLD
RV-12iS@Empennage
Construction Web Cam
Reply With Quote
  #2  
Old 02-10-2019, 09:11 PM
BCP Boys's Avatar
BCP Boys BCP Boys is offline
 
Join Date: Oct 2011
Location: Kennesaw, Ga
Posts: 715
Default Great tool

Used it about 2 hours ago...it’s one of the best.
__________________
Amir
----------
RV-7 - My Ferrari in the sky
RV-10 - Partnered with a good friend

Supporting VAF since the first visit
Reply With Quote
  #3  
Old 02-11-2019, 07:25 AM
merlin3 merlin3 is offline
 
Join Date: Jul 2014
Location: ohio
Posts: 152
Default

Yep i bought one to use for some of the construction work i do.
__________________
Justin
Rv-6, o360, whirlwind cs prop, old paint and panel
Rv-4,o-320,prince prop, mgl avionics screens - sold
Reply With Quote
  #4  
Old 02-11-2019, 10:42 AM
ppilotmike's Avatar
ppilotmike ppilotmike is offline
 
Join Date: Jan 2010
Location: Denver, CO
Posts: 1,951
Default Nice tool, but..

..for almost $300 you could buy 8 pneumatic rivet pullers from Harbor Freight.

Or, you could do what I did: Buy one from HF ($32ish) and buy their 2 year, no questions asked, extended warranty ($7). Over 8 years of building and trading up for new when the jaws wear out (they are not replaceable in the HF version). Works great!
__________________
Mike Rettig
EAA Chapter 301 www.eaa301.org
VAF Dues Current
RV-10 Working on the "Dreaded Doors"
http://www.mykitlog.com/users/index....ig&project=803
F-14 (Pedal Plane - Daughter's Project) "Flying"
https://www.youtube.com/watch?v=zKCyX2FXrlw
Reply With Quote
  #5  
Old 02-12-2019, 07:34 AM
llavalle's Avatar
llavalle llavalle is offline
 
Join Date: Oct 2008
Location: Québec, Canada
Posts: 418
Default

Quote:
Originally Posted by ppilotmike View Post
..for almost $300 you could buy 8 pneumatic rivet pullers from Harbor Freight.
You know what they say about tools right?
__________________
Philippe Marseille
RV-9A Kit Emp done, wings @50% - SOLD
RV-12iS@Empennage
Construction Web Cam
Reply With Quote
  #6  
Old 12-02-2019, 10:11 AM
AlpineYoda AlpineYoda is offline
 
Join Date: Nov 2019
Location: Boulder, CO
Posts: 10
Default

I'm getting my tool kit ready for my first build. I'm comfortable with almost everything on the list, except riveting. That looks like the one skill that will be new to me.

Per the above message, does the Milwaukee riveter (2250-20 m12) completely replace the need for pneumatic tools? I have a compressor for my nail guns, so I'm covered there, but I'd much rather have the ease of set up, clean up, and use of a battery device so I can drop in and out of the garage or basement when free and I'm not running a compressor after the little ones go to bed in the evening.

I haven't pulled a rivet since 7th grade shop class, so I frankly have no clue if that battery device is all I need. Any help you can provide would be great!
__________________
Tail / Empennage kit is on order...

Donated through 12/31/2020
EAA and AOPA member
Instrument and Multi-Engine Rated Private Pilot
Reply With Quote
  #7  
Old 12-02-2019, 10:32 AM
llavalle's Avatar
llavalle llavalle is offline
 
Join Date: Oct 2008
Location: Québec, Canada
Posts: 418
Default

Which model are you building? This is a rivet puller, for blind rivets. Works for the -12. There are 2 types of rivets on the Vans's kit :

-Blind rivets <-- this is the tool for it
-Solid rivets <-- which are either squeezed or pounded with a rivet gun with buck bar.

the -12 has both but all of the solid rivets can be done with a squeezer (no need to get a rivet gun).

Building anything else than a -12, you can buy the Milawaukee for the blind rivets but there are very few of them (the -12 has those almost everywhere)... but you'll still need a rivet gun (air) for the buck bar solid rivets.
__________________
Philippe Marseille
RV-9A Kit Emp done, wings @50% - SOLD
RV-12iS@Empennage
Construction Web Cam
Reply With Quote
  #8  
Old 12-02-2019, 10:37 AM
AlpineYoda AlpineYoda is offline
 
Join Date: Nov 2019
Location: Boulder, CO
Posts: 10
Default

Thanks for the help. I'm planning to do an RV-10 quickbuild (wings and airframe). So, it sounds like I still will need all the pneumatic tools.

So much to learn.....
__________________
Tail / Empennage kit is on order...

Donated through 12/31/2020
EAA and AOPA member
Instrument and Multi-Engine Rated Private Pilot
Reply With Quote
  #9  
Old 12-02-2019, 11:09 PM
GeoffP GeoffP is offline
 
Join Date: Sep 2018
Location: Warrimoo, NSW, Australia
Posts: 60
Default Me too

[quote=llavalle;1323736]So I'm starting a -12iS project and I don't really like working with pneumatic tools.

Found out that Milwaukee makes a battery powered puller in their M12 line (smaller batteries).

Did a modified version of the practice tool kit using LP4-3 instead of the AN4 rivets. This things works GREAT.]


I bought one also, and yes I know I could've gone for a pneumatic rivet puller but I've also got a lot of use for this out of reach of my compressor. There's also a longer (6" I think) nose piece kit which I also bought, and it makes it a little easier to reach some rivets without the head & handle getting in the way.
__________________
RV-9, Tail Feathers done, Wings started
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:06 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.