Changing plugs today on the 9A and I got a little too enthusiastic with torque. The plug adapter, for the P mag (automotive spark plugs) came out in two pieces rather than one. I called and Brad answered right away. He explained how little metal they have to work with dimensionally, in order to machine such a part. He then offered to send me a replacement at no charge to get me back in the air right away. What a great company !
I still have the broken adapter to remove from the cylinder head. Have put a sacrificial NGK plug back in the threads with some JB Weld. I hope tomorrow, after drying... it will all come out together and go right in the trash.
Just wanted to post my good experience with a vendor today on Van's.
Cheers to all and happy holidays.
I still have the broken adapter to remove from the cylinder head. Have put a sacrificial NGK plug back in the threads with some JB Weld. I hope tomorrow, after drying... it will all come out together and go right in the trash.
Just wanted to post my good experience with a vendor today on Van's.
Cheers to all and happy holidays.