Does anyone have an illustration of the outboard rib attach to the wing stand (slow build). More specifically the below instructions as I am having an issue visualizing, but I have been in meetings all day that that could play a part in my "numbness of the mind".
"Clamp or bolt the wing skeleton to the horizontal arms of the H-frame. To provide a mounting point on the outboard end of the wing, drill and bolt a temporary 5" long piece of aluminum angle, (visible in Figs. 7-4 and 7-5) parallel to the spar web, to the outboard rib with 3/16" bolts."
I appreciate the help!
"Clamp or bolt the wing skeleton to the horizontal arms of the H-frame. To provide a mounting point on the outboard end of the wing, drill and bolt a temporary 5" long piece of aluminum angle, (visible in Figs. 7-4 and 7-5) parallel to the spar web, to the outboard rib with 3/16" bolts."
I appreciate the help!