Originally Posted by g3xpert
There is about 12" of wire on the CHT probe and 10" on the EGT probe.
Neither my inquire to g3xpert nor the documentation clued my in on "how much wire" was on the CHT probes.
Your answer and photos were what I had been looking for.
BTW: given the short length of leads, the following documentation is a bit silly - "If the supplied sensor wires are not long enough to connect directly to the GEA 24/GSU 73, then Type K TC extension wire must be used."
Garmin's short pigtails and placement guidelines make it impossible to not use extension wire.