I have my checklist “N975G_Checklist.ace” file, saved to the root folder of my SD card, which I keep in the PFD. On startup, the G3X reads the file and makes it available for the checklist tab. Works well for me.
Assuming you have saved the .ace file from the checklist editor, just save it in the root folder of a compatible SD card and insert into the G3X. When started up, the G3X will have a checklist screen available.
- RV10, N1530G (reserved). Build in progress.
- RV12, N975G, "The Commuter"
- Several others that are now just great memories for me.
Last edited by rongawer : 05-06-2018 at 09:03 AM.