RV-6 O-320 engine mounts

I bought an RV-6. Conditional Inspection mech asked me to change engine mounts. Got part number from builder, but when removed, found not correct.
The mount that were removed are Lord J-5113. I can't find anywhere on line. Anyone know what certified aircraft they are intended for? New part number?
Thanks,
Zeke
[email protected]
703 801-6312

Does this help? Plans and catalogs are available from Vans. Would recommend the investment. https://shop.vansaircraft.com/cgi-b...8-498&browse=engines&product=vibration-mounts

Lord mounts

When I purchased Dynafocal Lord mounts from Vans in 2017 they did not list them online but by calling they had PN "EA DYNA VI-STD LORD" described as "VIB.ISO.LORD ALL EXCEPT-10"; what shipped was Lord J-9613-40.

I had some conical mounts previously that were PN J-6230-1 which is a kit of 2 ea J-6113-1 rubber bushing and 1 ea Y-8746-S aluminum bushing.



You'll get results on these PNs by using advanced search on VAF.

RV-6 mounts

I wondered if what I have is parts of 2 different cert A/C mounts. The 6113 (I did see a 5, not a 6, initially) look like mounts for Grumman AA-1, but not entirely.
If I order conical mounts from Van's, I now think I will get replacements for what I have.
Thank You, Sir.