RVG8tor
Well Known Member
I have searched the board but can't find anything specific to my question. I want my back seat grip controls to mirror the front other than the start button. My concern is with the flaps, since the switches can be in the up position, off is momentary. I have the flap control relay broad from vans. If one flap switch us up and the other is actuated to down will this burn the relay board, I am thinking that it would? So how do you control the conflict between the two flap switches?
I know TCW sells a flap controller that solves this issue, I already have the Safety Trim and Smart Start, I just want to avoid spending another $225 if there is a simple solution. I already plan a rear trim and flap lockout switch for when I am flying inexperience folks. I want the full controls for when it is me and another pilot.
Thanks for any advice or help.
I know TCW sells a flap controller that solves this issue, I already have the Safety Trim and Smart Start, I just want to avoid spending another $225 if there is a simple solution. I already plan a rear trim and flap lockout switch for when I am flying inexperience folks. I want the full controls for when it is me and another pilot.
Thanks for any advice or help.