After pulling off the ducktape that was used to protect the canopy against the epoxy i keep glue residue on the canopy: a string of some 25x 3 cm with tiny bits and pieces. Clearly ' feelable' with nails, but not removable yet.
I read this forum and tried (carefully) WD40 and turpentine (first on the inside, to see if there would be any damage to the plexiglass), but no significant results.
In the meantime I've read about polishing the plexiglass - and it does look at the process I've been through polishing the aluminum, but hey: having to sand these stains takes some guts I don' t have at the moment.
What are your ideas, network?
I read this forum and tried (carefully) WD40 and turpentine (first on the inside, to see if there would be any damage to the plexiglass), but no significant results.
In the meantime I've read about polishing the plexiglass - and it does look at the process I've been through polishing the aluminum, but hey: having to sand these stains takes some guts I don' t have at the moment.
What are your ideas, network?