grantcarruthers
Well Known Member
Can anyone give me a more complete description of this task in the right elevator construction????
I searched 713 and bevel and got no hits on the forum.
Instructions are to bevel 713/counterbalance skin inboard and aft over the understructure to get a smooth trasition.
Can't picture it so anyone have some words of wisdom.
This is for the -8 but figure most empennage are the same so posted in general, hope this is correct.
Thanks
Grant
I searched 713 and bevel and got no hits on the forum.
Instructions are to bevel 713/counterbalance skin inboard and aft over the understructure to get a smooth trasition.
Can't picture it so anyone have some words of wisdom.
This is for the -8 but figure most empennage are the same so posted in general, hope this is correct.
Thanks
Grant