Very timely as I am disassembling the stock (4-port) valve in my RV6 to address a small leak at the stem and increasingly stiff operation. New o-rings are planned.
I don?t know that I have it fully apart yet, but so far have only found one small o-ring at the top of the shaft, just below the large nut below the handle. I assume this one is the 011.
Below the handle and large nut I have removed a washer, a spring, washer like ring at the bottom of the spring, and a larger disc. The now bare shaft is still in place and I haven?t found a second o-ring. I assume I have more disassembly to go ...
Any help to remove the shaft appreciated ...
Thanks,
Peter