Originally Posted by Phenomflyer237
my plane, have to remove the prop to take the lower cowl off.
has anyone seen this before or have drawings to correct?
we think some of it has to do with the front baffling extending to far out. Any help would be appreciated.
This is definitely not the norm. You need to purchase a set of preview drawings from Vans for your 6A. Carefully study the drawings to see how the airbox baffling and cowl trim around the nose gear is designed. Also, have an experienced 6A builder look at your plane and figure out what you need to do to enable cowl removal with the prop installed.
You are in Florida, fly up to Jesse Saint and have him look at your cowl installation.