I have been trying to couple my I Fly 720 with my Pro Pilot by Trio for a while now and with limmited success. The early version of software on the I Fly seemed to work well but now it looses the GPS signal constantly with a perfect signal on the I Fly. I have contacted both companies and have had no success. Has anyone had a similar problem or can anyone tell me how to get them to work together successfully? Thanks.
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
I Fly and Trio Auto pilot
- Thread starter rcarson
- Start date
aussieflyer1
Well Known Member
Ifly
I have the Ifly720 and coupled to the Trutrak, is your baud rate on both the same....4800/9600
Just a thought
I have the Ifly720 and coupled to the Trutrak, is your baud rate on both the same....4800/9600
Just a thought
I was losing signal at times until I ran a dedicated ground wire for the rs232 data line. Airframe ground did not provide sufficient magic...
Sam Buchanan
been here awhile
Yep, the masterminds at Trio place a very high priority on using only valid NMEA data to drive the autopilot. The filters are tight and might reject a data sentence that gets roughed up a bit.
