SL30 faceplate

I experience some hardware issues with my SL30,probably the best NavCom out there, in the last 4/5 months the front clear plastic screen it's became detached ,now I can keep attach with some finger pressure ,but next day it's hanging again,when ask Garming at SunFun ,the answer was ,sorry to bad.
Any body have similar experience ,and may be the magic trick to re glued again
Thanks

You can or at least used to be able to buy a replacement lens. I got new ones for my Sl-30 and SL-70. They were about $60 each. The SL-70 came without the Apollo name. They had built in adhesive and just press in place after the old one is pried off and the seating area cleaned up.

SL30

Thanks,I will deeper my research for a replacement

Hello,

This thread might also be useful.

Thanks,
Steve

SL30

Now it's make sense,tomorrow will be a phone call to the dealer.
Thanks guys