Filling stall warning holes in QB wing
I don't have an answer for doing it with the tank attached.
I pulled the tanks to test them and while off I filled the right wing rivet holes with a soft rivets. I had them for fiberglass tip work. Easy. It will require a little bit of filler when painted.
I also installed the stall warning kit on the left wing: Belt and suspenders.
Builders Blog http://elstien.us/wordpress/
Tail Kit delivered 6-2013
Started building April 2014
QB Wing and Fuse Delivered December 2015
Finishing QB wings on September 2018
Moved to Port Orange FL November 2018
Project moved to Port Orange Feb 2019
Dues Paid through 2019