FlyFastJP
Well Known Member
Well, carburetor is off and boxed up ready to go to MSA for some bench testing. See if they can find any issues. Figured I'd do the 500 hr on the mags while I'm down, so they are off and going to Robert at Clem's at DWH. Also added a couple new small items on the panel, with more to come. Need to find out all the fuel fittings I need to add the FC-10 and a fuel pressure gauge. The flow meter looks to have NPT threads instead of AN, but I'll measure it up before buying stuff. New aluminum blank panel is on its way to me. Will start doing some design work to get it put in. I have some time before the first SARL race of the season, so might as well get some stuff done.
