RV-4 Defroster

kjelle69

Active Member

• Jan 27, 2017

• #1

RV-4 Defroster design for 3D-Print:

 

Xkuzme1

Well Known Member

• Jan 28, 2017

• #2

Ok... interest peaked... but explain.

 

kjelle69

Active Member

• Jan 28, 2017

• #3

Mostly a test to make some parts with a 3D printer.
Two defroster outlets one on each side of the compass diverts warm air up to the windscreen. Perfect design to 3D print, the result is very light and strong.

 

Xkuzme1

Well Known Member

• Jan 28, 2017

• #4

Gotcha. Nice work.