What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Mysterious holes in QB wings--inboard rib

bobhope2505

Active Member
I'm about to install the wings, but there are a series of holes in a diagonal pattern in the inboard rib in the aft most part--maybe 14 or so but I don't have it in front of me right now. It REALLY looks like a bracket goes there, but I have scoured the plans looking for some instructions and can't find any. I find it hard to believe that Van's would go through the trouble of putting those holes there without a reason. Did I miss something? If so, can you provide any direction?

Thanks

Syrus
 
Hello Syrus,
I believe those holes are for flap brackets. I don't have wing plans in front of me, but as I recall that inboard rib is the same used as some of the inboard ribs just no flap bracket installed.

Pic here?
e6rp0k.jpg

Shawn
 
Last edited:
Mystery solved! To back that up, I went back to the inventory sheets and verified that no 1025B flap brackets were included with the kit.

Thanks!!
 
Back
Top