What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

IO-540 Push Rod Shroud Tube Question

jetjok

Well Known Member
I am working on a IO-540- J series engine replacing the push rod tube seals. I noticed that the tubes have different P/N for exhaust and intake. But, I am trying to see what the difference in the tubes are.
Mea culpa to follow...I put all the tubes together in the parts tank, and now need to figure out what goes where! How can the tubes be identified? I will inspect more closely, but it appears that any P/N's were probably printed not etched on the tube.
Thanks, guys & gals!
 
Thanks!

Yep...I had googled a parts manual to get a number for a replacement tube, and failed to notice that I had ended up with a different series IO-540. Came to the hangar and got my manual, and was relieved to see that they are indeed all the same. Had me worried as I have all but one reinstalled! ��
Sorry to have taken your time, jbarr, but do appreciate it!
 
Back
Top