What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Prop extension question

E

egp8111

Well Known Member
Patron
Vans catalog seems to indicate that the 4 in. prop extension is available in either 3/8 in. for the o-320 or 1/2 for the o-360 prop bolt size. My prop requires 7/16 bolts. Am I missing something here? Can the lugs be changed or the extension be drilled to accept 7/16 bolts.
Thanks
Skip
 
Skip,
Buy the prop extension from the link below. Sam is great with customer service and knows what he is talking about. That is the same thing I needed.

http://www.sabermfg.com/

CIMG2343.JPG
 
Last edited:
I also recommend going direct to Sam at Sabre. He will make what ever you need. If I remember correctly, the 3/8" and 7/16" bushings have the same OD and can be replaced. No sense doing this on a new purchase when you can get exactly what you need.

Larry
 
+2 on the recommendation to call Sam at Sabre. He can even custom make an extension if needed, but I doubt this is your situation.

:cool:
 
You must log in or register to reply here.
Back
Top