Iluke
Well Known Member
I'm planning to install a Superior IO-360 in my RV-7. I want to get as much done on my firewall beforehand. I've read that the specified locations for cable-firewall penetrations (DWG 19- See below) are pretty good for the throttle, but some have said that the mixture cable location isn't the best for some non-Lycoming engines.
If there is anyone out there who has installed a Superior I'd appreciate any advice on where to run the mixture cable through the firewall. Specifically, did you use the specified location and if so, was it OK?
I'm planning a Superior XP, injected IO-360 with their "cold air" forward facing sump Precision Airmotive Silver Hawk fuel injection.
If there is anyone out there who has installed a Superior I'd appreciate any advice on where to run the mixture cable through the firewall. Specifically, did you use the specified location and if so, was it OK?
I'm planning a Superior XP, injected IO-360 with their "cold air" forward facing sump Precision Airmotive Silver Hawk fuel injection.