So there I was applying some colour to various bits and pieces at last. I had this painting thing nailed, the prep was done and the paint was going on nicely, no runs, no orange peel, nice coverage without being too heavy. Life was good... and then this happened!!
http://s456.photobucket.com/user/whittfic/media/image.jpeg.html
This is the inboard rear corner of one of my elevators. I was in the process of suspending it from a hook in the roof of the spray booth when the support wire slipped from my hand and it hit the floor!! Needless to say I was less than happy and all I wanted to do at that moment was start flinging tools around the workshop. After I stopped calling myself all the idiot names I could think of I actually decided to clean up and call it a day.
So now I am asking the collective wisdom here for any suggestions/guidence to fix this. I'm thinking I should be able to carefully manipulate this back into shape fairly easily but if anyone knows of any potential 'gotchas' I am all ears.
Clive Whittfield
Auckland
New Zealand
RV6 (painting)
http://s456.photobucket.com/user/whittfic/media/image.jpeg.html
This is the inboard rear corner of one of my elevators. I was in the process of suspending it from a hook in the roof of the spray booth when the support wire slipped from my hand and it hit the floor!! Needless to say I was less than happy and all I wanted to do at that moment was start flinging tools around the workshop. After I stopped calling myself all the idiot names I could think of I actually decided to clean up and call it a day.
So now I am asking the collective wisdom here for any suggestions/guidence to fix this. I'm thinking I should be able to carefully manipulate this back into shape fairly easily but if anyone knows of any potential 'gotchas' I am all ears.
Clive Whittfield
Auckland
New Zealand
RV6 (painting)