Scott Will
Well Known Member
Just put the skin on my QB wing and wondering what's the best way to mount the flap to ensure it's aligned with the aileron and also have the required 1/4" gap (thinking about some 1/4 ply to set the gap)... just wondering about how to clamp the hinge on the wing and drill it while maintaining alignment.
Also - how do you know the proper location of the aileron (left - right)... basically I used two washers on the inboard side and made a 19/32 spacer (plans say 17/32 but mine was a little wider).
Thanks much in advance.
Scott
http://rv7a.home.comcast.net
Also - how do you know the proper location of the aileron (left - right)... basically I used two washers on the inboard side and made a 19/32 spacer (plans say 17/32 but mine was a little wider).
Thanks much in advance.
Scott
http://rv7a.home.comcast.net