VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 03-07-2020, 07:19 PM
Jake14 Jake14 is offline
 
Join Date: May 2014
Location: Seattle
Posts: 298
Default oil strainer crush gasket

trying to order a crush gasket for the oil strainer on the io-390. The Lycoming parts catalog doesn't seem to show one. Is this a Lycoming error?

https://ibb.co/qmsYKPp
__________________
RV-14A flying 350 hrs
Reply With Quote
  #2  
Old 03-07-2020, 07:28 PM
Tandem46's Avatar
Tandem46 Tandem46 is offline
 
Join Date: Jan 2005
Location: Broomfield, CO
Posts: 627
Default

If you’re talking about the suction screen, your link does show one. “18” right below 19.
__________________
RV-7 Flying since 2004
1,100 hrs+
Reply With Quote
  #3  
Old 03-07-2020, 08:01 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,118
Exclamation Warning

Clicking on the link in post 1 will attempt to load a program called "Margefrick" or something close.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #4  
Old 03-07-2020, 08:02 PM
Jake14 Jake14 is offline
 
Join Date: May 2014
Location: Seattle
Posts: 298
Default

isn't item 15 the plug which holds the suction screen in? It has different safety wire holes than item 19. Shouldn't the crush gasket be between items 15 and 14?
__________________
RV-14A flying 350 hrs
Reply With Quote
  #5  
Old 03-07-2020, 08:04 PM
Jake14 Jake14 is offline
 
Join Date: May 2014
Location: Seattle
Posts: 298
Default

Mike, The link is to the Imgur image hosting site

https://ibb.co/qmsYKPp
__________________
RV-14A flying 350 hrs
Reply With Quote
  #6  
Old 03-07-2020, 08:51 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,118
Default

Quote:
Originally Posted by Jake14 View Post
Mike, The link is to the Imgur image hosting site
The image was up there for a short time, then the computer went into a loop of install this, or not--------clicking no, or Xing out only restarted the loop.

Control Alt Delete finally got me out of it.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #7  
Old 03-07-2020, 10:01 PM
RV8JD's Avatar
RV8JD RV8JD is offline
 
Join Date: Jan 2005
Posts: 758
Default

Quote:
Originally Posted by Jake14 View Post
trying to order a crush gasket for the oil strainer on the io-390. The Lycoming parts catalog doesn't seem to show one. Is this a Lycoming error?

https://ibb.co/qmsYKPp
There is one for the oil suction screen on the IO-360-M1B, Item #14 below.

But note that the 1.00" I.D. Annular Gasket, Lycoming Part Number 06E19769­-1.00, is Item #14 for the IO-360-M1B and Item #18 for the IO-390. And the plug LW-12545 (Item #15 for the IO-36-M1B and #19 for the IO-390) are the same between the 2 engines.



__________________
Carl N.
Arlington, WA (KAWO)
RV-8, 715 Tach Hours
(Pic 1),(Pic 2)
- Out with the Old, In with the New
(Pic)
RV-8, 1938 Tach Hours (Pic 1),(Pic 2) - Sold

Glasflügel Standard Libelle 201B - Sold
Rolladen-Schneider LS1-f - No longer owned

Last edited by RV8JD : 03-07-2020 at 10:22 PM.
Reply With Quote
  #8  
Old 03-07-2020, 11:50 PM
Jake14 Jake14 is offline
 
Join Date: May 2014
Location: Seattle
Posts: 298
Default

yeah, thanks. Looks like the 390 has a couple of additional parts vs. the 360 (items 13 and 15 on the 390 drawing).

For some reason they didn't show the 390 plug and gasket in line with the suction screen like they do on the 360

Has anyone here removed the screen from an IO390? are those 2 parts (13 and 15) attached to the screen when you remove it?

Actually, looking closer at item 15, it looks like an optional plug to replace the standard cap to which you can attach a hose for some other purpose
__________________
RV-14A flying 350 hrs

Last edited by Jake14 : 03-08-2020 at 12:07 AM.
Reply With Quote
  #9  
Old 03-08-2020, 12:13 AM
OKAV8r OKAV8r is offline
 
Join Date: Feb 2007
Location: Edmond, OK
Posts: 83
Default

AN960-16 ??
Reply With Quote
  #10  
Old 03-08-2020, 08:33 AM
M McGraw's Avatar
M McGraw M McGraw is offline
 
Join Date: Dec 2012
Location: Greenback, TN
Posts: 525
Default Flat washer

Quote:
Originally Posted by OKAV8r View Post
AN960-16 ??
AN960 is a flat washer. AN900 is an annular copper crush washer. If you want a 1” ID you would get the AN900-16.
__________________
Marvin McGraw, 5TN4
RV-14. #140039 Complete
Flight hours: 400+
2020 Dues Paid
The Dues Paid note is a reminder for me

Last edited by M McGraw : 03-08-2020 at 08:44 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:53 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.