VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 01-27-2020, 05:20 PM
GeoffP's Avatar
GeoffP GeoffP is offline
 
Join Date: Sep 2018
Location: NSW, Australia
Posts: 116
Default

I cheated a bit, and got my good mate John Deere and his offsiders "Rusty" Shackles and "Ropey" Slings to do the unloading.

Having said that, the boxes aren't that heavy and once on a smooth concrete surface they can be pushed around single handed fairly easily.
__________________
RV-9, Tail Feathers done, Wings over halfway done
Reply With Quote
  #12  
Old 01-27-2020, 06:34 PM
snopercod's Avatar
snopercod snopercod is offline
 
Join Date: Aug 2016
Location: Asheville, NC
Posts: 2,033
Default

Boxes? My kit came in one box:

__________________
(2020 dues paid)
Reply With Quote
  #13  
Old 01-27-2020, 07:38 PM
N804RV's Avatar
N804RV N804RV is offline
 
Join Date: May 2013
Location: Mount Vernon, Wa
Posts: 592
Default

Quote:
Originally Posted by snopercod View Post
Boxes? My kit came in one box:


Dang! The Bee Gees helped you unload your kit? That's awsome!
__________________
Ken W.
Mount Vernon, WA
2019 VAF Supporter
Reply With Quote
  #14  
Old 01-28-2020, 04:39 AM
BobbyLucas's Avatar
BobbyLucas BobbyLucas is offline
 
Join Date: Oct 2019
Location: Belleville, MI
Posts: 229
Default

When my RV-10 empennage was shipped, I had to rent a U-haul and go pick it up from the ODFL terminal. I was a little miffed at that.

My RV-12 empennage (much smaller box), was delivered to my home by ODFL with a liftgate and lowered onto Hazzard Frought dollies like others have used. The driver seemed surprised that they would ask him to deliver such a large box to a residence, and was skeptical he could get it off the truck, but I assured him, "dude, we got this." And it was no big deal.

Why couldn't they deliver my RV-10 emp? Too big for the liftgate I assumed?
__________________
Bobby Steinmetz
Van Buren TWP, MI
Student Pilot, Mechanical Engineer
RV-12is Empennage Kit, Fuse Kit, #121228
N781PT Reserved
Donated 2020
Reply With Quote
  #15  
Old 01-28-2020, 05:41 AM
WingsOnWheels WingsOnWheels is offline
 
Join Date: Mar 2009
Location: Plano, TX
Posts: 2,014
Default

I picked up all of my kits at the depot with my pickup truck. I have a full-width ATV ramp, so I just slid them down the ramp. Due to timing, I moved all of the kits by myself, it was never a problem.
__________________
Colin P.
RV-6A #20603
Complete 5/10/19
PP SEL / A&P
I donate every year on my B-Day (in Dec), but donated early in Sep'19.
Reply With Quote
  #16  
Old 01-28-2020, 06:37 AM
BrianDC's Avatar
BrianDC BrianDC is online now
 
Join Date: Mar 2016
Location: Northern VA
Posts: 248
Default

Let Vans know when you order (or when it's being crated) that you need a lift gate service and to send you the shipping info once they have it. I called the shipping company once I had a tracking number to verify that they would send it out with lift gate service so the driver would have to get it off the truck with a pallet jack.

Some areas may not have the ability to provide lift-gate service or it may not have been coordinated properly. If that is the case, talking to the shipper to make sure you understand options. Rent a trailer, borrow a pick-up, or get a u-haul and pick it up at the depot if necessary.

Guess I was lucky that for each of my slow-build kits so far I was able to get a lift-gate and the driver was able to easily get the box in my garage for me with his pallet jack.
__________________
Brian Lester
RV10 - #41778
Empennage - Done (for now)
Wings - Done (for now)
Fuselage - in progress
Finish Kit - arrived
RV10builder.com
KVKX / KHEF
Reply With Quote
  #17  
Old 01-31-2020, 04:01 PM
bksboiler bksboiler is offline
 
Join Date: Sep 2005
Location: Marion, IN
Posts: 3
Default

I have a 4X8 work table on casters, I rolled it up to the end of the truck, the driver used the pallet jack to bring the empennage to the back of the truck and we just slid it onto the table and rolled it right back into the shop. it was just a drop of a few inches due to the elevation of my shop versus the drive and worked well.

It was my first delivery, but went well, much better than I expected. I'll likely need a little bit more help for the heavier crates, but I was pleased with how easy it went on the first one.
Reply With Quote
  #18  
Old 01-31-2020, 04:48 PM
PilotjohnS PilotjohnS is offline
 
Join Date: Jan 2016
Location: Southwest
Posts: 959
Default Hinges

When i get the crate in the garage, i pit hinges on the lid. That way i can open the lid and get to stuff in the crate as i need it.
__________________
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2020, worth every penny

RV9A- Status:
Tail 98% done
Wings 98% done
Fuselage Kit 98% done
Finishing Kit 10% Canopy
Electrical 5%
Engine In Stock
www.pilotjohnsrv9.blogspot.com
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:56 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.