Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 03-29-2017, 11:50 AM
Marabou Marabou is offline
Join Date: Oct 2012
Location: Moscow
Posts: 17
Default Windshield molded fairing rivet or not

I used many different combinations of words while searching but did not find any comments whether to rivet molded fairing or not. RV-7 planes stated that CS4-4 rivets are optional and I used them. 14 plans say nothing. Had anybody riveted molded fairing? Thanks
Ruslan Bord
RV-7a flying, RV-14a very slowly building
Reply With Quote
Old 03-29-2017, 04:43 PM
whittfic's Avatar
whittfic whittfic is offline
Join Date: Apr 2007
Location: Auckland, New Zealand
Posts: 123
Default An option

I used a slightly different approach on my RV 6. I custom made the windscreen fairing from carbon and used Sikaflex to bond it in position. No rivets and very solid. Don't know if this is relevant to your installation so use as a data point only.

Clive Whittfield
New Zealand
Painting a very slow build RV6
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:48 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.