VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #291  
Old 06-15-2019, 09:55 PM
cardinalflier cardinalflier is offline
 
Join Date: Jul 2015
Location: Granite Bay, Ca
Posts: 107
Default

Also, my plan is to run one side of my dual system for a while, then complete the wiring, dump the remaining mag, and go all EI. But, I need the Skyview to read the signal from SDS, otherwise I will not have a rpm reading with the dual system. Thus, the importance of getting this solved now. Bruce Estes
Reply With Quote
  #292  
Old 06-16-2019, 10:24 AM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,159
Default

Bruce, I'll contact Dynon on Monday and see if we can get to the bottom of this for you.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 432.6 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm


Reply With Quote
  #293  
Old 06-17-2019, 02:39 PM
cardinalflier cardinalflier is offline
 
Join Date: Jul 2015
Location: Granite Bay, Ca
Posts: 107
Default Success

Barry from SDS contacted me last night (Sunday). They found THEIR mistake in a wiring harness. I made the correction this morning and I now have a tach reading from the CPI-2. Flew for .5. I now have 2 hours on the system and all is good. Now on to more tuning and testing. Bruce Estes
Reply With Quote
  #294  
Old 06-17-2019, 03:37 PM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,159
Default

Glad this got figured out and Barry is very embarrassed at the wiring error.

A revised manual has been uploaded to the CPI-2 and Aircraft Documentation area pages today. All users, please reference this one as it corrects and clarifies some of the wiring issues on the tach and kill switch wires, specifically pages 4-6. It also has more guidance on hooking up to Garmin, Dynon and AFS glass.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 432.6 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm


Reply With Quote
  #295  
Old 06-25-2019, 11:47 AM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,159
Default Revised Manual

Revised manual is now posted: http://sdsefi.com/cpi-2manjune2519.pdf

This supersedes previous versions.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, RV6A C-GVZX flying from CYBW since 2003- 432.6 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
http://sdsefi.com/cpi2.htm


Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:29 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.