What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

37-07 fuel neck question

amekler

Well Known Member
Patron
on step 3 it says match drill #30 the holes into the flange of the fuel neck and then put nut plates on. it calls for AN526C632R8 which are too big for the #30 holes
Is there something I'm missing?

Alan
N603NH
120250
 
It appears that a step to final drill the screw holes to # 27 was inadvertently left off.

#27 is the standard holes size used for all #6 screws
 
Back
Top