VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 07-10-2017, 06:05 PM
Doering Doering is offline
 
Join Date: Feb 2017
Location: Dundas, Ontario
Posts: 1
Default Pitot tube upgrade

i would like to upgrade my pitot tube. Can someone point me in the right direction/suggestions?
Reply With Quote
  #2  
Old 07-10-2017, 06:38 PM
Chkaharyer99 Chkaharyer99 is offline
 
Join Date: Oct 2011
Location: Pilot Hill, CA
Posts: 870
Default

Check out this thread:

Garmin AOA pitot retrofit

http://www.vansairforce.com/communit...&highlight=Aoa

I hope this helps.
__________________
Charlie
RV-8
Reply With Quote
  #3  
Old 07-10-2017, 07:16 PM
BillL BillL is offline
 
Join Date: Sep 2007
Location: Central IL
Posts: 3,991
Default

Good threat referenced - - I just did this. I installed the Garmin GAP-26 (w/o regulation) with Gretz mount. It was not too much trouble. Just be mindful of what your drill and installation order is to have the doubler overlap the spar flange and attach via an angle to the rib flange. The most tricky part was through drilling the rib/angle holes inside the inspection hole.

Gretz came with a doubler, but I had to make a new one due to the existing holes of the piper blade. If you have no holes, the gretz doubler should work fine. You will only need a short length of angle to attach to the rib. It appeared the joggle on the Gretz part was too shallow, so check that. A .063" joggle is required. Not hard to make one using the EAA method.

PM me if you have questions of the details. An angle drill was really handy for the rib holes, and they were riveted with Cherry Max. All others were drilled from outside, shot and bucked.
__________________
Bill

W&B done
Doing paperwork.
Beginning G3X calibrations.

Last edited by BillL : 07-10-2017 at 07:19 PM.
Reply With Quote
  #4  
Old 07-11-2017, 10:00 AM
Raymo's Avatar
Raymo Raymo is offline
 
Join Date: Nov 2014
Location: Richmond Hill, GA (KLHW)
Posts: 1,344
Default

Dynon also has heated/unheated pitot/AOA tube options.
__________________
Ray
RV-7A - Slider - N495KL - First flt 27 Jan 17
O-360-A4M w/ Catto 3 blade NLE, AFP FM-150 FI, 1 PMag, Vetterman Trombone Exh, SkyTech starter,
PlanePower Alt, FlightLines Interior, James cowl & plenum
All lines by TSFlightLines
NSDQ

"The object of the game, gentlemen, is not to cheat death: the object is not to let him play."
Patrick Poteen, Sgt. U.S. Army


- - 2016/17 donation compliant - -
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:34 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.