Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 07-05-2017, 08:28 AM
BoilermakerRV's Avatar
BoilermakerRV BoilermakerRV is offline
Join Date: Jun 2009
Location: Danville, IN (West of Indy)
Posts: 152
Default WD-657 Installation

Took advantage pf the long weekend and got a lot done on the RV. Started on the external step installation on Tuesday. I really like where my steps are sitting at the moment. The hole in the skin isnít overly large and the flange of the step is nearly flush with the skin. What little gap remains can be easily closed out with a little finger pressure.

The only catch is, the current location only picks up three of the four specified fastener locations common to the F-724 rib. I would have to move the step up about 5/8Ē to capture all four fasteners as shown in the plans. This would make my cutout much larger (and possibly even start to show on the bottom). Iím wondering if I can get by with just three of the four.

In the picture below (Left side step, forward edge to left of the photo), the crosses are the new fasteners laid out per the plans. The dots are the approximate location of the F-724 fasteners.

Danville, IN

RV-7A Fuselage
N317PU Reserved
2017 Dues paid (July 2017)
Reply With Quote
Old 07-05-2017, 08:47 AM
wirejock's Avatar
wirejock wirejock is offline
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 2,634
Default Step

Mine is the same but I measured and added one hole above and below.
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2016. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 12:42 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.