Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 08-16-2018, 09:41 PM
iamtheari iamtheari is offline
Join Date: Nov 2017
Location: ND
Posts: 337
Default Page 26-14 / 26-21 "no rivet zone" and taildragger step cover plates

Page 26-21 step 4 says to rivet the baggage ribs to the center bottom skin except for the "no rivet zone" from page 26-14.

Page 26-14 has a hatched area of the center bottom skin for the "no rivet zone." There are also arrows to the forward two holes on each F-01484A cover plate for the taildragger, saying "do not rivet." The aft two holes of the cover plates were riveted back on page 26-10 step 17.

When do the forward two holes of the cover plates get riveted? I did them on page 26-21 step 4 but if I need to drill them out, now is the time...since I also have to drill out the center two holes on each of the F-14140 stiffeners that I inadvertently riveted a couple months back.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 11:57 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.