Hey Guys, I updated my pitch trutrak bracket. I thought pictures might be helpful. I will update my webpage with all the installation instructions and drawings for the RV10. At www.AviationTechProducts.com
According to the Trutrak owner, Jim Younkin, it is nessesary to keep the servo arm close to the belcrank. Having an AN3-14 with spacers would not work well. The new bracket only uses a couple of washers.
New Bracket
Old bracket. The distance between the servo arm and the belcrank was excesive.
Any question please let me know!
[email protected]
According to the Trutrak owner, Jim Younkin, it is nessesary to keep the servo arm close to the belcrank. Having an AN3-14 with spacers would not work well. The new bracket only uses a couple of washers.
New Bracket
Old bracket. The distance between the servo arm and the belcrank was excesive.
Any question please let me know!
[email protected]