RV 14-A and a JD Air canopy Latch
I have a RV 14-A and a JD Air canopy Latch. I looked very carefully at the rivet pattern on my QB Fuselage and the placement of the JD Latch. It looks like one of the forward rivets is a problem with placement. Before I cut the fuselage skin, does anyone have a 1:1 scale drawing of the RV14 and the JD Latch? The JD Air drawing is not to scale and designed for RV7.
RV14-A QB, Flying after 1200 build hours
New Lycoming IO390 X, HZ CS 2 Blade,
Garmin Dual G3X 460, GTN 625, A/P 507,
GTR 200 and 20, 245 audio, GTX 45R and more.
Last 20 years: Commander 114 & PA28