OK so I was attaching my fuel lines to the tank last night and ended the crimping the left line where it makes the 90 degree bend. I am thinking I can either replace the whole line or just cut it off and put a 90 fitting in place. Any pros or cons? Seems like the 90 fitting might be worth a try just to avoid a whole lot of pain and extra work.
https://lh3.googleusercontent.com/Y...UvHusmTzaICo93ay4uSlXDJgekBEJ-Jg=w480-h640-no
Drippy
40644
https://lh3.googleusercontent.com/Y...UvHusmTzaICo93ay4uSlXDJgekBEJ-Jg=w480-h640-no
Drippy
40644