VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 01-30-2018, 01:59 PM
Mech1 Mech1 is offline
 
Join Date: Jan 2009
Location: Eureka Mt
Posts: 31
Default Cabin Egress Handle

This handle is a good idea. It is incorporated on the 12 iS. I would like to try to install on an existing 12. Anyone attempt this? Vans will sell the parts but have not come up with retro kit with a plan. Thanks
Reply With Quote
  #2  
Old 01-30-2018, 04:45 PM
rv9builder rv9builder is online now
 
Join Date: Jan 2005
Location: Irvine, CA
Posts: 618
Default

Take a look at pages 29iS/U-10 and 11 from the RV-12iS fuselage plans. They show how and where the egress handle attaches to the upper forward fuselage skin. It isnít complicated, but youíll have to be very careful to correctly position the ribs that support the handle. The iS skin has prepunched holes, making this easy, but those holes donít exist in the first generation RV-12 skin.
__________________
Mark
RV-12iS Fuselage
RV-9A Project: Sold

VAF donation made for 2018
Reply With Quote
  #3  
Old 01-30-2018, 04:58 PM
DHeal DHeal is offline
 
Join Date: Sep 2006
Location: Windsor, California
Posts: 632
Default

SEARCH this site: http://www.vansairforce.com/communit...ghlight=handle
__________________
David Heal - Windsor, CA (near Santa Rosa)
EAA #23982 - EAA Technical Counselor and Flight Advisor; CFI - A&I
RV-12 E-LSA #120496 (SV w/ AP and ADS-B) - N124DH flying since March 2014 - 600+ hours (as of Feb 2018)!
VAF donation through June 2018.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:46 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.