VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 09-04-2017, 09:06 AM
AeroDog AeroDog is offline
 
Join Date: Aug 2011
Location: New London, NC (near Charlotte), Boulder, CO
Posts: 184
Default Page 35-03 Painting main gear legs

The build manual is clear: The main gear legs are to be painted with two-part epoxy primer, then painted. The legs are shiny and pitted as a result of bead blasting I'm told. My question regards prep for the primer. Should Alumaprep and Alodine be used or is thorough cleaning enough? (Yes, I used the search function.)

Jerre
__________________
Empennage, fuselage and wing kits complete
Finish kit nearly complete
RV-12 120593 N42KJ reserved
http://webpages.uncc.edu/~hill
http://jerre-hill.blogspot.com
=VAF= dues paid 2018
Reply With Quote
  #2  
Old 09-04-2017, 11:33 AM
rongawer's Avatar
rongawer rongawer is offline
 
Join Date: Dec 2007
Location: Brentwood, CA
Posts: 339
Default

If you're using a modern self-etching epoxy primer; if desired, scuff with a fine grit sandpaper, wipe clean with acetone, mineral spirits, or whatever prep the primer calls for, and prime.
__________________
Ron Gawer

- RV10, N1530G (reserved). Empennage in progress.
- RV12, N975G, Flying
Reply With Quote
  #3  
Old 09-04-2017, 11:39 AM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,807
Default

Because of the blasting texture, etching with a surface prep containing phosphoric acid (aluma prep, etc.) is the best way to assure a surface that is 100% cleaned of oxidation before primer application.
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
  #4  
Old 02-13-2018, 10:12 PM
DaveLS DaveLS is offline
 
Join Date: Oct 2007
Location: Pensacola, FL & 2R4
Posts: 194
Default Powder coat?

Can the main gear legs be powder coated?
__________________
120500
Reply With Quote
  #5  
Old 02-15-2018, 09:02 PM
rolick22's Avatar
rolick22 rolick22 is offline
 
Join Date: Oct 2013
Location: Powell, OH
Posts: 115
Default

I'm going to say yes on the powder coat because the new finishing kit main gear legs are.
__________________
_____________________________________________
David Rohrlick
PPSEL A&P
RV-12 Finished (Empennage, Fuselage(1st gen), and Wing kit)
Empennage finished (need to add the panel cut out)
Wings finished (need to add the left landing light)
iS Finishing Kit In work
iS Fuselage Finished
1st GEN FUSELAGE SOLD
Serial#12-0864
N864DR Reserved
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:43 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.