VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #31  
Old 01-31-2018, 12:24 PM
supik supik is offline
 
Join Date: Mar 2014
Location: Bratislava, Slovakia
Posts: 66
Default

Quote:
Originally Posted by AV8ER View Post
Igor,

I believe it was Eric I spoke with. He said that NONE of the factory aircraft have wicks on them although he did say they are rarely flown in IFR (where static is most likely to occur). He was also unaware of issues on other aircraft without static wicks. I came to the conclusion that if there was a problem it would be known to someone either at Garmin or Vans and neither could report knowledge of issues. Eric is currently building a -10 and does not have wicks installed on his as a side note.

- Tim
Tim, thank you. I understand his decision. IFR flying in VFR or marginal VFR conditions does not qualify for wicks installation.
I might find myself circumnavigating storms in summer. The last thing I want is to loose my comm in real IFR. My current decision is to put wicks on the airplane but only half the amount suggested by DG. Maybe the comm would work just fine, but I don't want to find out later in a serious situation
__________________
Igor

RV-10 in progress
Build Log
Reply With Quote
  #32  
Old 01-31-2018, 01:11 PM
rocketman1988 rocketman1988 is offline
 
Join Date: Jun 2010
Location: Sunman, IN
Posts: 781
Default why?

So you are going to put wicks on but only half the number recommended?

You do realize that there is science behind those wicks, right? Why do it half way?
__________________
Bob
Aerospace Engineer '88

RV-10
Structure - 90% Done
Cabin Top - Aaarrghhh...
Doors - Done
On Gear
290 HP Barrett Hung
ShowPlanes Cowl with Skybolts Fitted - Beautiful

Dues Paid 2017,...Thanks DR+
Reply With Quote
  #33  
Old 01-31-2018, 01:14 PM
Carl Froehlich's Avatar
Carl Froehlich Carl Froehlich is offline
 
Join Date: Dec 2007
Location: Dogwood Airpark (VA42)
Posts: 1,231
Default

Quote:
Originally Posted by supik View Post
Tim, thank you. I understand his decision. IFR flying in VFR or marginal VFR conditions does not qualify for wicks installation.
I might find myself circumnavigating storms in summer. The last thing I want is to loose my comm in real IFR. My current decision is to put wicks on the airplane but only half the amount suggested by DG. Maybe the comm would work just fine, but I don't want to find out later in a serious situation
Has any RV ever had this problem? I never heard of it - but perhaps you have some data I donít. If so, Iím sure many would like to know.

Iíve used ADS-B weather when IFR to circumnavigate many thunder bumpers along the East Coast. Never had a problem.

Carl
Reply With Quote
  #34  
Old 01-31-2018, 02:12 PM
supik supik is offline
 
Join Date: Mar 2014
Location: Bratislava, Slovakia
Posts: 66
Default

Quote:
Originally Posted by Carl Froehlich View Post
Has any RV ever had this problem? I never heard of it - but perhaps you have some data I donít. If so, Iím sure many would like to know.

Iíve used ADS-B weather when IFR to circumnavigate many thunder bumpers along the East Coast. Never had a problem.

Carl
Carl, no I don't. There is no clear answer from the experts, how could I provide one? I only know, P-static builds up and has to exit somewhere. DG makes you purchase 12 wicks; Vans says never had a problem but we do not operate in IMC very often. All of the modern certified IFR planes do have wicks, but this debate could go on for a very long time..
__________________
Igor

RV-10 in progress
Build Log
Reply With Quote
  #35  
Old 02-08-2018, 05:36 PM
MauleDriver's Avatar
MauleDriver MauleDriver is offline
 
Join Date: Aug 2006
Location: Lake Ridge Aero Park - Durham NC
Posts: 158
Default

A few years ago, flying out west, I lost a com radio while encountering some 'snow virga' at 10k concurrent with observing some lightening or an electric discharge in my peripheral vision. I am not knowledgeable about static wicks and what they are intended to do or prevent but I've been led to believe they would have prevented this particular incident.

Having said that, that is the only possibly static related problem encountered in 1,000 hours of RV10 flying with a good deal of flying in eastern weather in IFR conditions.

Regarding Antenna: I installed Archer Nav and Comm. I replaced the Comm some years ago because I found that if performed slightly worse than my whip. I am considering replacing the Nav because of ILS reception problems at a single airport/runway. Having said that, I think both the Archer Nav and Comm work just fine for VFR work.
Reply With Quote
  #36  
Old 02-09-2018, 04:39 PM
Aiki_Aviator's Avatar
Aiki_Aviator Aiki_Aviator is offline
 
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 225
Default Archer NAV vs clones

I installed an Archer NAV for IFR and have been very satisfied. Not used it a lot, mainly GPS approaches, however, never failed with good distances.

The one thing I know from my research in NAV antenna when I was building that a lot of the so called Archer NAV antenna are "clones", and these where were the majority of problems existed.

Mr Archer used to individually tune each and every antenna he built and as such the difference between his $100 odd and a clone of $10 in parts was chalk and cheese.

So, if looking at either, make sure you are assessing "real" Archer NAV antenna performance and not looking at comments about home made clones. You might be surprised at the results.
__________________
__________________
Andrew Long
#41055
RV10: Happy little Vegemite :-)
Feb 2015: Now fully functional..... and quick

http://www.ozrv10.com
Reply With Quote
  #37  
Old 02-11-2018, 11:00 PM
rdamazio's Avatar
rdamazio rdamazio is offline
 
Join Date: Dec 2013
Location: Santa Clara, CA
Posts: 167
Default

My post on antennas, in case it helps:
https://www.airplane.build/2015/11/r...-antennas.html
(disclaimer: not flying yet)

Mouser has good hints on static wicks: http://www.mouser.org/projects/rv-10/index.html
__________________
Rodrigo Damazio Bovendorp
San Jose, CA
RV-10 builder #41623
Build log at http://www.airplane.build/
VAF dues paid
Reply With Quote
  #38  
Old 02-18-2018, 04:38 PM
NorrisAir NorrisAir is offline
 
Join Date: Mar 2014
Location: Veradale, WA
Posts: 19
Default

I built an RV14A and installed the Archer VOR/ILS antenna in the right wing tip along with an LED landing light, LED strobe, and LED position light and have not had any problems with the ILS (tested the VOR but rarely use since GPS is more useful).
__________________
Norris Brown
Building RV10
Built and flying RV14A - N14NP
XP400, Dual PMags, G3X System, ThermX Deice
First flight April 11,2017
Flying P210
2018 dues paid
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:10 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.