VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-17-2018, 01:30 PM
edward7048 edward7048 is offline
 
Join Date: May 2010
Location: Kokomo, In.
Posts: 95
Default movement of artifical horizon

I am getting some movement of the artificial horizon up and down in my
sv 1000t, sent a video to dynon and they said that it was due to vibration,
I have van's beef up installed in the adahrs area and my prop blades are
with in .1 deg. of each other. has anyone else had this problem?
Reply With Quote
  #2  
Old 06-17-2018, 01:44 PM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 7,611
Default

It has been seen but I would say it is rare on 12's that have the brace installed.
If your blade pitch is close, start looking at other things that could induce airframe vibration. ( confirm a good carb synch, have a dynamic prop balance done)
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:10 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.