Recently sat in a RV4 where current owner pilot and builder who is about 5'9" and could not close canopy due to my head was in the way. Seat pan cushion was about 3" thick and was setting pan made to same height as top of spare. The only mod I could see making a cushion that sat on the space behind the spare that is approx. 3" lower than the wing spar. Not sure if I would fit even after I did that. I am 6' with long torso.
Any wisdom out in RV land would could offer some advice or is this mission impossible that is getting someone my size into a RV4?
Any wisdom out in RV land would could offer some advice or is this mission impossible that is getting someone my size into a RV4?