Incorrect wiring diagram WH00125
For us Dynon guys. On page 5 of 15, under AFS/Dynon left wing.
Putting on a 9pin DSub to connect to the Adahrs and the colors in the jacketed wire F406 is correct. However, the donít correspond with the colors going in to the Adahrs. They show a gray wire going into pin 2, green jacket ground into pin 5, red into pin 3, black into pin 7, Black/red into pin 9 which is really what/blk.
Vanís didít have an answer as to why the color change and suggest I call SteinAir. They passed me around and called me back. Here is the correct pin connection.
This info may already be here in the forum, I should have checked.
RV14 in gestation