Do as much as possible at home. If you have the room, at home, mount the wings and check the flight controls and all the electrical systems. It is not hard to install wings with hardware bolts at home.
Have the engine ready for first start, cowlings done, ready for flight.
Tail installed, controls rigged including a check of the electrics.
Complete all tail and intersection firings.
If the tail is too long to transport, take it off, there are not really that many fasteners.
If you want to get flying you could do the wheel and gear farings on rainy days at the airport, they are not required for first flight.
Doing the work at home will save you many, many hours of driving back and forth to the airport.
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average
speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger flying #153
St.Thomas, Ontario Canada, CYQS
Last edited by Tom Martin : 05-15-2018 at 10:42 AM.