If I do baffles before the canopy am I boxing myself into a corner?
Test fitting the baffles is a challenge. Thinking it will be a huge mess if I put the RTV on before fitting the right and left rear baffles. The left one is particularly a pain.
Also have to reclock the #3 manifold pressure fitting cuz I have a 45 on there and it needs to aim down to get the hose under the baffle.
Oh and what in the world is self etching RTV? I have some Dow Corning 732 but self etching?
Ser 104142, RV-14A
Ready to gas it up!
Last edited by JDA_BTR : 05-13-2018 at 06:45 PM.