VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-01-2018, 09:37 AM
Cwood2000 Cwood2000 is offline
 
Join Date: Jun 2012
Location: Tallahassee, fl
Posts: 76
Default Incorrect wiring diagram WH00125

For us Dynon guys. On page 5 of 15, under AFS/Dynon left wing.
Putting on a 9pin DSub to connect to the Adahrs and the colors in the jacketed wire F406 is correct. However, the donít correspond with the colors going in to the Adahrs. They show a gray wire going into pin 2, green jacket ground into pin 5, red into pin 3, black into pin 7, Black/red into pin 9 which is really what/blk.
Vanís didít have an answer as to why the color change and suggest I call SteinAir. They passed me around and called me back. Here is the correct pin connection.
Wht/Blk. 7
Wht/Red. 9
Black. 2
Red. 3
GRn. 5

This info may already be here in the forum, I should have checked.
__________________
Aka YellaDawg
RV4
RV14 in gestation
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:54 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.