Aileron BellCrank: 11-05
I put the wings together a long time ago. I am trying to figure out if I am going to be annoyed or not. Are the bellcrank brackets put in with nuts or nut plates? My fuel tanks are on and I don't know if there is a way to figure this out without taking off the fuel tank. I looked at the plans and it is unclear if there is a nut plate on the other side of the spar.
The reason I ask, is that there is a bracket that connects the top and bottom brackets together for the servo.
EAA Chapter 1093 member
RV-14 (serial number 140073)
N73XP (at least that # reserved now)