What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

g3x touch trim

Azjulian

Well Known Member
just going through the setup of my G3x touch on my RV12.

I currently have a cross through the Trim on the display and it says CAL... The trim works, I just cant find out how to calibrate that in the manuals... Can anyone shed some light ?

Julian
 
Hello Julian,

Instructions for calibrating the trim and flap position inputs of your G3X Touch system may be found in section 32.4.25.3 of the current G3X installation manual (rev Z) under the heading "Trim/Flap Position Input Calibration", which is on page 32-157.

- Matt
 
Back
Top