VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #21  
Old 09-18-2018, 11:19 AM
RV7Guy's Avatar
RV7Guy RV7Guy is offline
 
Join Date: Jan 2005
Location: Chandler, AZ
Posts: 2,816
Default Tips

I guess the same argument can be made for the tips. On my first 7 I used Tinnerman washers to secure the tips. They look pretty good. You could also paint them and the tops of the screw if you want that look.

Personally I don't think the unpainted screws in the tank look that bad. If you wait a couple of weeks you can them tight enough without damaging the paint. Brush a little Chapstik on the bevel of the screw so it won't grab the paint.

Both methods work. Just remember that Murphy will occupy the second seat shortly after you paint tank with the screws in!!!!
__________________
Darwin N. Barrie
Chandler AZ
www.JDair.com
RV-7 N717EE-Flying (Sold)
RV-7 N707EE-Building
EMS Bell 407,
Eurocopter 350 A-Star Driver
Reply With Quote
  #22  
Old 09-18-2018, 11:19 AM
rocketbob's Avatar
rocketbob rocketbob is offline
 
Join Date: Jun 2006
Location: 8I3
Posts: 2,989
Default

I use the same sort of finishing washers on fiberglass and run them thru #6 or #8 dimple dies. Think I got them from McMaster.
__________________
Bob Japundza CFI A&PIA
N55BC RV-6 borrowed, flying
N678X F1 Rocket, under const.
N244BJ RV-6 "victim of SNF tornado" 1200+ hrs, rebuilding
N8155F C150 flying
N7925P PA-24-250 Comanche, restoring
Not a thing I own is stock.
Reply With Quote
  #23  
Old 09-18-2018, 02:12 PM
krw5927 krw5927 is offline
 
Join Date: Aug 2010
Location: Wichita, KS
Posts: 1,871
Default

Quote:
Originally Posted by sglynn View Post
I painted with tanks on, but I did remove all the #8 screws and plugged the holes with little silicon plugs made for painting. Then after the paint had set for a couple weeks I put the screws back in. So the screws show like I had painted with the tank off and if I ever want to take it off the screws are not painted over. You can see it here. http://www.mykitlog.com/users/catego...category=11091
Got a link or any more info on the silicon plugs?
__________________
Kurt W.
RV9A
FLYING!!!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:12 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.