Door Handle Gear Width

I am fabricating a door mechanism to act as a center latch. Can anyone tell me what width the van's spur gears are in the door handle structure. I can't tell if they are 3/16" or 1/4", but guessing 3/16" I don't have my finishing kit yet.

Thanks,

Larry

Gear Dimensions

Larry, the toothed portion of the gear is 0.25" wide. The smaller diameter flange with the set screws is another 0.25" for a total of 0.5".

Paddy said:

Larry, the toothed portion of the gear is 0.25" wide. The smaller diameter flange with the set screws is another 0.25" for a total of 0.5".

Click to expand...

Thanks much. I appreciate it.

Larry