VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 02-03-2010, 01:33 PM
gpiney gpiney is offline
 
Join Date: Jan 2005
Location: The Beautiful NJ Shore
Posts: 409
Default Rear mounting an Odyssey?

I plan on mounting my battery in the back, However, I plan on using an Odyssey PC680. The parts supplied with the -1 fuselage kit are for the Concord battery. Are there other parts available for mounting a PC680 or do you have to mod the existing parts? If modded, Anyone got Pictures?

Thanks,
__________________
Greg Piney
RV-8 2547
Empennage Done!
Beginning Fuselage Final Assembly!
(Tub finished, on to Landing Gear).
Reply With Quote
  #2  
Old 02-03-2010, 02:27 PM
RV8MW RV8MW is offline
 
Join Date: Jan 2007
Location: CLINTON,NC
Posts: 109
Default

Greg,

There is a few pictures on my kitlog web page. Click on all on the right and scroll down pictures. Had to modify tray that came with kit used angle at bottom cut top u channell to give clearance to cables at top. I ended up changing the upper hold down ordered one on the internet from a battery supplier in ca.
__________________
MIKE WARREN
RV8 N184MW RESERVED
TMX-IO360 REDGOLD,HARTZELL CS
CLINTON N.C.
www.mykitlog.com/mwarren
Reply With Quote
  #3  
Old 02-04-2010, 07:41 AM
William Slaughter's Avatar
William Slaughter William Slaughter is offline
 
Join Date: Jan 2005
Location: Houston, Texas
Posts: 436
Default Mod the existing tray

I set the 680 in place, & traced around it with a Sharpie, then did some basic measuring to be sure I had it marked square and straight. Fabricated three pieces of angle with rivet holes, then clamped and match drilled them to the existing bracket. On to the next thing!



Found the picture.
__________________
William Slaughter
Houston, TX
RV-8QB FF complete, baggage door done. Fiberglass work mostly done. Now at the airport for final assembly.

Last edited by William Slaughter : 02-06-2010 at 08:48 AM. Reason: Added picture
Reply With Quote
  #4  
Old 02-04-2010, 10:05 AM
scsmith scsmith is offline
 
Join Date: Jan 2008
Location: Ashland, OR
Posts: 1,676
Default I just did this

I just switched from a Concorde to the Oddessy. I set it in place, using the normal hold-down, and measured for a spacer block in front. I cut a piece of wood to that dimension, and retained it with one screw in from the front channel on the tray so it doesn't walk out. Took 10 minutes, and I have a tray that will work with either battery now.
__________________
Steve Smith
Aeronautical Engineer
RV-8 N825RV
IO-360 A1A
WW 200RV
"The Magic Carpet"
Hobbs 460 in 8 years
also LS-6-15/18 sailplane
Reply With Quote
  #5  
Old 02-05-2010, 02:45 PM
wera710's Avatar
wera710 wera710 is offline
 
Join Date: May 2008
Location: Pottstown PA
Posts: 209
Default

ok...am I the ONLY guy who laughed my *** off when I read the topic title??

Been a looong day.
__________________
Scott "Lawbreaker" (yeah, its a fair cop!)
RV-8 N710PX "Bad Attitude!"
Reply With Quote
  #6  
Old 04-15-2017, 02:01 PM
jseavolt's Avatar
jseavolt jseavolt is offline
 
Join Date: Jul 2010
Location: Powell, OH
Posts: 40
Default

Scott, the post may be several years old...but I still laughed out loud at your comment
__________________
Jason "Bacon" Seavolt
RV8 QB N143MS
6.5 yr build (1st flight 4/23/17)
Currently in paint at Evoke Aviation
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:05 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.