VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 01-17-2020, 12:00 PM
iamtheari iamtheari is offline
 
Join Date: Nov 2017
Location: ND
Posts: 376
Default

After playing with snap bushings, wiring harnesses, and pitot tubing last night, my current plan is to run the pitot and AOA tubes and the pitot heat power and ground wires, twisted together, through a series of SB750-10 bushings in the upper aft systems hole in the left wing ribs. The GMU 22 will be on the "ADAHRS" wiring harness, in the factory location, routed through the forward systems hole on the first rib and then the lower aft systems holes in the next three ribs.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:24 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.