Headset Wire Length

I was finally getting around to hooking up my headset harnesses to their D-Subs, and for some reason the pilot side wire is too short to reach the connectors! I don't find anyone else having had this problem on this forum, does anyone else recall such a problem?

Not with the headset wires, but with the magnetometer wires for the Skyview. I just crimped longer leads in and moved on.

Not a big deal, I may have to do the same. First I am going to crawl around the tunnel and under the panel to see if it got routed wrong or something. Odd only I am having the problem, I am fairly sure we all got the same length wires.. They are the right wires, they have the pilot and co-pilot markings from Vans still intact.